External Tap Tempo

[JohnLutz]

Is it possible to mod a TAW with a quarter inch jack for an external momentary switch. My pedalboard is currently set up with with an A/B looper. The A loop is for rhythm and the B loop is for lead. I have a DD-20 in each loop and a single momentary switch that sets the tempo for both delays simultaneously. It would be really sweet to add a tremolo to the same tap switch so I can tap in one place to get everything in sync.

John

[cusackmusic]

Yes, you can replace the Switch with a 1/4" jack. I can send you one for $15.00, including shipping. It plugs into the board, no soldering required! If you can solder, just replace the switch with a 1/4" jack. Make sure you measure which wire is ground...

I have a few customers that parallel a TAW with a DD-5, and a TAW with a Tap-A-Phase.

Let me know if you need any more info.

Jon

[Bümbox]

Oh man, that's sweet. I'll have to try that with my TAW and TAP. Thanks for the info, Jon.